Sealing the enclosure to the work surface – Labconco Protector Work Stations 3930021 User Manual
Page 23
Advertising
Chapter 3: Getting Started
Product Service 1-800-522-7658
19
NOTE: Face velocity profiles and smoke testing should be
performed frequently per your organization’s quality system to
ensure safe performance.
Sealing the Enclosure to the Work
Surface
When the enclosure has been set in place it may be sealed at the work surface to
prevent spilled materials from collecting under the walls. A bead of silicone
sealant is recommended to seal the enclosure to the work surface.
!
Advertising
This manual is related to the following products: