Labconco Protector Work Stations 3930021 - Manual (Page 64)

Chapter 7: Accessorizing & Modifying Your Enclosure
Product Service 1-800-522-7658 60
2. Guardian™ 1000 Digital Airflow Monitor or Guardian™ 500 Airflow
Monitor
The Guardian 1000 Digital Airflow Monitor or Guardian 500 Airflow
Monitor allows you to continuously monitor airflow through the enclosure.
The rear exhaust plenum and upper light is factory prepared to mount either
monitor.
Catalog # Description
3944700 Guardian 500 Airflow Monitor, 115V, 60 Hz
3944701 Guardian 500 Airflow Monitor, 230V, 50 Hz
3908800 Guardian 1000 Digital Airflow Monitor 115V, 60 Hz
3908801 Guardian 1000 Digital Airflow Monitor 230V, 50 Hz
3. Exhaust Transition Adapters (For Remote Blower models only)
Adapter connects to the enclosure (on remote Protector Work Stations)
from either the top or the bottom of the rear plenum so the duct can be
routed either up or down, respectively. The transition is available for either
5.00" ID hose or 6" OD duct. The 5.00" ID hose upper connection is
standard and included with the FilterMate.
Catalog # Description Material
3912400 Upper connection, 5" Hose Coated Steel, Epoxy Coated
3912401 Upper connection, 6" Duct Coated Steel, Epoxy Coated
3912402 Lower connection, 5" Hose Coated Steel, Epoxy Coated
3912403 Lower connection, 6" Duct Coated Steel, Epoxy Coated
4. Remote Blowers (For Remote Protector Work Station Only)
Has a 1/4 hp direct drive motor and corrosion-resistant epoxy-coated steel
housing and wheel with blower inlet of 6.00" ID. Outlet dimensions are
4.25" x 7.38" OD.
CFM @ Static Pressure-Inches of H
2
O
S.P. 0.0" 0.125" 0.25" 0.50" 0.75" 0.87"
CFM 595 560 515 420 300 167
Catalog # Description
Shipping Wt.
(lbs./kg.)
4863500 Remote Blower, 115 V, 60 Hz. 4.4 amps 35/16
4863501 Remote Blower, 115/230 V, 50 Hz, 5.6/2.8 amps 35/16
7053501
Explosion-Proof Remote Blower, 115 V, 60 Hz,
4.4 amps
40/18