Labconco Protector Work Stations 3930021 User Manual
Page 62
Product Service 1-800-522-7658
58
Chapter 7:
Accessorizing and Modifying
Your Enclosure
There are several ways to accessorize the enclosure for your individual
requirements. These include the addition of accessory work surfaces, airflow
monitors, exhaust transition adapters, remote blowers, exhaust dampers,
FilterMate Portable Exhausters, carbon filters, storage cabinets, stands and
utility shelf kit.
1. Work Surfaces
An optional dished work surface is available to attach to the enclosure.
Dished work surfaces are contoured to fit the dimensions of the Protector
Work Stations to contain spills. Epoxy is chemical resistant. Work
surfaces are available either with or without a sink. See Chapter 3 for
illustrations and below for dimensions of work surfaces. See Appendix B
for Protector Work Station dimensions.
Catalog #
Description
Dimensions (W x D x H)
6942003
Black w/sink, 4-foot wide
48" x 26.75" x 1.25" includes
valves HOT/CW gooseneck
and sprayer
3908402
Black, 4-foot wide
48" x 26.66" x 1.00"
NOTE: 6942003 Work Surface with sink may be mounted on Base Stands
3746702 or 3746712.