Labconco PuriCare Procedure Stations 38100 - Manual (Page 12)

Chapter 3: Getting Started
Product Service 1-800-522-7658 7
Unpacking the Procedure Station
Carefully remove the outer carton and inspect it for damage that may have
occurred in transit. If damaged, notify the delivery carrier immediately and
retain the entire shipment intact for inspection by the carrier.
Note: United States Interstate Commerce Commission rules require that
claims be filed with the delivery carrier within fifteen (15) days of delivery.
Do not return goods without the prior authorization of Labconco.
Unauthorized returns will not be accepted.
If the cabinet was damaged in transit, you must file a claim directly with the
freight carrier. Labconco Corporation and its dealers are not responsible for
shipping damages.
Do not discard the carton or packing material until all of the components
have been checked, installed and tested.
The cabinet is secured to the pallet in two places on each side. To access the
nuts and bolts, remove the side panels by removing and keeping the two
Phillips screws on both panels. Swing the front of each panel away from the
cabinet, and lift it straight up to remove the panel from the cabinet.
Procedure Station Components
Labconco manufactures Procedure Stations with a 10-inch or a 12-inch sash
opening. Each of these cabinets is available in a 4- or 6-foot model. Models
are available in 115V or 230V. Locate the cabinet model you received in the
following table. Verify that the components listed are present and
undamaged.
Plus the following, located in a box underneath the work surface :
Part # Component Description
3848301 User’s Manual
Drain Valve Assembly and fasteners
Power Cord
Product Registration Card
If you did not receive one or more of the components listed for the cabinet, or
if any of the components are damaged, contact Labconco Corporation
immediately for further instructions.