Labconco PuriCare Procedure Stations 38100 - Manual (Page 16)

Chapter 3: Getting Started
Product Service 1-800-522-7658 11
3. Move the base stand into its final location. Using a carpenter’s level,
adjust each leveling foot until the stand is level in both planes as shown in
Figure 3-2. You are now ready to lift the Procedure Station onto its
stand.
Manual or Electric Hydraulic Lift Base Stands
These base stands offer infinitely adjustable height between 25.5 and 33.5
inches, giving a cabinet work surface height of 28.0 to 36.0 inches. The
height is adjusted either by a manual (hand crank) or electric pump that
drives hydraulic rams in the legs of the stands. All of the hydraulic stands are
equipped with fixed feet, but can be converted to caster wheels with the
addition of Caster Kit #3784000. The Base Stands for each cabinet model is
listed in Table 3-2 below.
Width Manual Lift Stand # Electric (115V) Lift Stand # Electric (230V) Lift Stand #
4' 3780201 3780101 3780104
6' 3780202 3780102 3780105
Table 3-2
Figure 3-2