Labconco PuriCare Procedure Stations 38100 - Manual (Page 40)

Chapter 5: Using The Cabinet
Product Service 1-800-522-7658 35
User Selectable Features
The PuriCare Series Procedure Station offers the user unparalleled flexibility
and convenience. The operation of the blower, fluorescent and UV lights can
either be operated manually, or you may choose to use the SmartStart
™ or
NightSmart ™ features that activate functions automatically when the sash is
opened or closed.
The UV lamp can be programmed to operate for a given time interval when
the sash is closed, before it shuts off.
NOTE: During the first fifteen seconds of operation, the Cabinet
performs an auto-diagnostic routine to check the operation of the
microprocessor. You cannot access the menu during this time.
NOTE: When you are in the menu mode, if a selection is not made within
30 seconds, the display will reset back to display mode.
NOTE: Pressing the appropriate touchpad button will override
SmartStart
TM or NightSmart TM selections.
To access the menu, press the “MENU” button. The display panel will
show the first level menu. To select from the various menu options press
the “▲” or “▼” buttons until the selected option is displayed. Press
“OK” to accept that option, or press “MENU” to return to the previous
menu level.
For further explanation of the menu and its options, please refer to figure 5-4.
Timer Operation
NOTE: The timer button allows activation of an interval (countdown) or
stopwatch (elapsed) timer. The timers cannot be operated
simultaneously.
To access the main timer menu, press the “Timer” button anytime during
normal operation. The main timer menu is shown on the LCD display. Use
the “▲” and “▼” buttons to highlight the Interval or Stopwatch Timer. Press
the “OK” button to select the highlighted timer function.