Xblue Networks X-44 - Manual (Page 23)

Getting Started
With your PC powered up, make sure to disconnect any connections (wired or wireless) to your
Local Area Network (Internet). Be sure to power up the WiFi Adapter and connect it to your
Personal Computer.
From your Personal Computer
1. From
your
desktop
right
click
on
the
“Network”
ICON
and
locate
and
click
on
Properties
or
go
to
Control
Panel,
locate
and
double
click
on
(Windows
7)
Network
and
Sharing
Center
(Windows
XP)
Network
Connection
and
double
click.
Windows
7
requires
an
extra
step
-­‐
locate
and
double
click
on
“Change
Adapter
Settings”
which
can
be
found
on
the
left
side
of
your
display.
2. Locate
and
right
click
on
the
“Local
Area
Connection”
for
your
wired
(because
the
WiFi
Adapter
is
connected
to
your
computer
using
a
cable)
Internet
connection
and
locate
and
click
on
properties.
Generally,
a
wireless
adapter
will
say
“Wireless”
or
“WiFi”.
3. Locate
and
double
click
on
(Windows
7)
“Internet
Protocol
Version
4
(TCP/IPv4)”
(Windows
XP)
Internet
Protocol
(TCP/IP).
4. Select “Using the Following IP Address”
Product Overview
23