Xblue Networks X-44 User Manual
Page 29
5. Select obtain DNS Server address automatically.
6. Click on “OK” to exit the Version 4 (TCP/IPv4) page
7. Click on “OK” to exit the Local Area Connection Properties page Select “Obtain an IP Address
Automatically’
8. Close the network and sharing page
9. To verify that the WiFi Adapter programming was successfully, you should be able to open your
Internet Browser and connect to the Internet.
a.
If you cannot access the Internet, start by restoring the WiFi Adapter back to factory
default (Page3) and redo the programming steps (pages 6 - 12).
b.
If you can access the Internet, unplug the WiFi adapter and connect it to your Device.
10. Remember, since the first step to this process was to disable your access to the Internet, don’t
forget to re-enable your access.
Note:
The quality of your wireless connection may affect the quality of the voice connection. There is no
guarantee, written or implied, that the XBLUE Wireless adapter will work 100 percent of the time.
Product Overview
29