Xblue Networks X-44 - Manual (Page 56)

Mute
Description:
Each X-44 has a mute button that that temporarily disable the telephone’s microphone.
Operation:
This feature requires no programming.
Press the Mute button to disable the telephone’s microphone, which when active, will light Red. Press the
Mute button again to resume your conversation. When Mute is disabled, the LED will not be lit.
Notes:
• The Mute button may not mute an ancillary headset
Name in Display
Description:
Extensions can be programmed with the name of user allowing other extensions to see who is calling.
Operation:
This feature can be programmed using the Telephone User Interface (TUI) or the Graphical User
Interface (GUI) through a standard Internet Browser.
Notes:
• Enter the name, with up to 12 characters. You cannot use a space or any character that does not
appear on a telephone keypad.
On-Hook Dialing
Description:
On hook dialing, also known as Hot Keypad allows you to dial a number without lifting the handset or
pressing the speaker button. It also allows you to delete unwanted digits by press the “Backsp” button
Operation:
No programming is needed for this feature.
Simply dial an extension or outside telephone number without lifting the handset or pressing the speaker
button. You may press the Dial Softkey, the check button or wait 5 seconds for the system to evaluate the
dialed number and then process.
Notes:
Feature Descriptions
56