Xblue Networks X-44 - Manual (Page 72)

Network Page
The network page is used to automatically or manually enter the telephone’s network addresses. When
set to DHCP the telephone will automatically join your existing network and be assigned an IP Address. If
you prefer to use static IP Address, just select “Static” and enter the desired IP Address.
Network
• DHCP - When set to DHCP, the X-44 is automatically assign a valid IP Address
• Static - When set to Static, you will have to enter a valid IP Address manually
QoS Settings
Use this parameter to match the QoS protocol that is set on the network. If QoS is not set, both
parameters should remain as “Best Effort”.
• DSCP for RTP - For best results leave this at “Best Effort”
• DSCP for SIP - For best results leave this at “Best Effort”
Web Programming
72