Xblue Networks X-44 - Manual (Page 31)

No. Part Name Description
1 Handset Top Cradle For placement of the Handset
2 Hook Switch For hanging up your handset
3 Cradle Latch Used to Secure the handset to the base unit
4 Speaker Speaker output for handsfree operation
5 Handset Bottom Cradle for the bottom of the handset
6 Handset Cord Port Used to connect the handset to the telephone base
7 Headset Wire Port Used to connect an ancillary headset to the telephone base
8 Message LED Light Bar Flashes for a new call and when there is a new Voice Mail Message
9 Graphic LCD LCD display showing date, time, phone number, Caller ID, line status
etc.
10 Soft Keys Soft keys change as the phone is being used, which will assist you
with the most used features
11 Sidecar - EDM Console A special module that connects an additional 24 programmable
buttons
12 Navigation OK or Select Key The center “Check” button of the “Cell-Phone-Like” navigation keys, is
used as the “enter”, “select” or “OK” button
13 Navigator Control Keys Navigation, left, down, up and right ^ v < > are used to navigate
through menu programming and during the normal operation.
14
Telephone Line Buttons 1-4 The X-44 telephone has 4 telephone line buttons, labeled 1, 2, 3 and
4. Each line button has a green LED that indicates that it is being used
by an extension on your network.
15 Speaker Button Press the speaker button to answer a ringing call. The button will turn
green when the speakerphone is active.
Product Overview
31