Parameter settings, System settings, Parameter settings -1 – Altera Arria 10 Avalon-ST User Manual

Page 44: System settings -1

Advertising
background image

Parameter Settings

4

2014.08.18

UG-01145_avst

Subscribe

Send Feedback

System Settings

Table 4-1: System Settings for PCI Express

Parameter

Value

Description

Number of

Lanes

×1, ×2, ×4, ×8

Specifies the maximum number of lanes supported.

Lane Rate

Gen1 (2.5 Gbps)

Gen2 (2.5/5.0

Gbps)

Gen3 (2.5/5.0/8.0

Gbps)

Specifies the maximum data rate at which the link can operate.

Port type

Native Endpoint

Root Port

Legacy Endpoint

Specifies the port type. Altera recommends Native Endpoint for all

new Endpoint designs.
The Endpoint stores parameters in the Type 0 Configuration Space.

The Root Port stores parameters in the Type 1 Configuration

Space.

Interface Type

Avalon-ST

Avalon-MM

Avalon-MM with

DMA

Avalon-ST with

SR-IOV

Selects the interface to the Applciation Layer.

RX Buffer

credit

allocation -

Minimum

Low

Balanced

Determines the allocation of posted header credits, posted data

credits, non-posted header credits, completion header credits, and

completion data credits in the 16 KByte RX buffer. The 5 settings

©

2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

Advertising