Mirrors – Subaru 2006 Legacy User Manual

Page 155

Advertising
background image

3-40

Instruments and controls

Mirrors

Always check that the inside and outside

mirrors are properly adjusted before you

start driving.

„

Inside mirror

The inside mirror has a day and night po-

sition. Pull the tab at the bottom of the mir-

ror toward you for the night position. Push

it away for the day position. The night po-

sition reduces glare from headlights.

„

Auto-dimming mirror/com-

pass (if equipped)

1) Left button
2) Auto dimming indicator
3) Photosensor
4) Right button

The auto-dimming mirror/compass has an

anti-glare feature which automatically re-

duces glare coming from headlights of ve-

hicles behind you. It also contains a built-

in compass.
y

By pressing and releasing the left but-

ton, the automatic dimming function is tog-

gled on or off. When the automatic dim-

ming function is on, the auto dimming indi-

cator light (green) located to the right of

the button will illuminate.
y

By pressing and releasing the right but-

ton, the compass display is toggled on or

off. When the compass is on, an illuminat-

ed compass reading will appear in the

lower part of the mirror.

Even with the mirror in anti-glare mode,

the mirror surface turns bright if the trans-

mission is shifted into reverse. This is to

ensure good rearward visibility during re-

versing.

T Photosensors

The mirror has a photosensor attached on

both the front and back sides. If the glare

from the headlights of vehicles behind you

strikes the mirror, these sensors detect it

and make the reflection surface of the mir-

ror dimmer to help prevent you from being

blinded. For this reason, use care not to

300293

1

2

3

4

300517

300518

Advertising