Subaru 2006 Legacy User Manual

Page 289

Advertising
background image

8-10

Driving tips

wiper blades (winter blades) during the

seasons you could have snow and sub-

zero temperatures. Blades of this type

give superior wiping performance in

snowy conditions. Be sure to use blades

that are suitable for your vehicle.

NOTE

When the season requiring non-freez-

ing type wiper blades is over, replace

them with standard wiper blades.

„

Corrosion protection

Refer to the “Corrosion protection” section

(chapter 10).

„

Snow tires

T All models except OUTBACK

Your vehicle is equipped with “all season

tires” which are designed to provide an

adequate measure of traction, handling

and braking performance in year-round

driving. In winter, it may be possible to en-

hance performance through use of tires

designed specifically for winter driving

conditions.

If you choose to install winter tires on your

vehicle, be sure to use the correct tire size

and type. You must install four winter tires

that are of the same size, construction,

brand and load range and you should nev-

er mix radial, belted bias or bias tires since

this may result in dangerous handling

characteristics. When you choose a tire,

make sure that there is enough clearance

between the tire and vehicle body.

Remember to drive with care at all times

regardless of the type of tires on your ve-

hicle.

During high-speed driving, non-

freezing type wiper blades may not

perform as well as standard wiper

blades. If this happens, reduce the

vehicle speed.

y

When replacing original tires with

winter (snow) tires, make sure you

use only the same size, construc-

tion and load range as the original

tires listed on the tire placard. Us-

ing other sizes and construction

may affect speedometer/odome-

ter calibration and clearance be-

tween the body and tires. It also

may be dangerous and lead to

loss of vehicle control.

y

You must install four winter tires

that are of the same size, circum-

ferences, construction, brand,

and load range. Mixing other siz-

es, circumferences or construc-

tions may result in severe me-

chanical damage to the drive train

of your vehicle and may affect

ride, handling, braking and speed-

ometer/odometer calibration. It

also may be dangerous and lead

to loss of vehicle control.

y

Do not use a combination of radi-

al, belted bias or bias tires since it

may cause dangerous handling

characteristics and lead to an ac-

cident.

Advertising