Subaru 2006 Legacy User Manual

Page 406

Advertising
background image

Consumer information and Reporting safety defects

13-7

CONTINUED

asymmetrical tire that has a particu-

lar side that must always face out-

ward when mounting on a vehicle.

y

Accessory weight

The combined weight (in excess of

those standard items which may be

replaced) of floor mats, leather seats

and cross bars to the extent that these

items are available as factory-in-

stalled equipment (whether installed

or not).

y

Curb weight

The weight of a motor vehicle with

standard equipment including the

maximum capacity of fuel, oil, and

coolant and air conditioning.

y

Maximum loaded vehicle weight

The sum of curb weight, accessory

weight, vehicle capacity weight and

production options weight.

y

Normal occupant weight

150 lbs (68 kg) times the number of

occupants (3 occupants).

y

Occupant distribution

Distribution of occupants in a vehicle,

2 in front, 1 in rear seat.

y

Production options weight

The combined weight of those in-

stalled regular production options

weighing over 5.1 lbs (2.3 kg) in ex-

cess of those standards items which

they replace, not previously consid-

ered in curb weight or accessory

weight.

y

Vehicle capacity weight

The total weight of cargo, luggage

and occupants that can be added to

the vehicle.

y

Vehicle maximum load on a tire

Load on an individual tire that is deter-

mined by distributing to each axle its

share of the maximum loaded vehicle

weight and dividing by two.

y

Vehicle normal load on a tire

Load on an individual tire that is deter-

mined by distributing to each axle its

share of the curb weight, accessory

weight, and normal occupant weight

and dividing by two.

„

Tire care – maintenance and

safety practices

y

Check on a daily basis that the tires

are free from serious damage, nails,

and stones. At the same time, check

the tires for abnormal wear.

y

Inspect the tire tread regularly and

replace the tires before their tread

wear indicators become visible. When

a tire’s tread wear indicator becomes

visible, the tire is worn beyond the ac-

ceptable limit and must be replaced

immediately. With a tire in this condi-

tion, driving at even low speeds in wet

weather can cause the vehicle to hy-

droplane. Possible resulting loss of

vehicle control can lead to an acci-

dent.

y

To maximize the life of each tire and

ensure that the tires wear uniformly, it

is best to rotate the tires every 7,500

miles (12,500 km). Rotating the tires

involves switching the front and rear

tires on the right-hand side of the ve-

hicle and similarly switching the front

and rear tires on the left-hand side of

the vehicle. (Each tire must be kept on

its original side of the vehicle.) Re-

place any damaged or unevenly worn

tire at the time of rotation. After tire ro-

tation, adjust the tire pressures and

make sure the wheel nuts are correct-

ly tightened. A tightening torque spec-

ification and a tightening sequence

specification for the wheel nuts can be

found “Flat tires” section in chapter 9.

Advertising