Subaru 2006 Legacy User Manual

Page 43

Advertising
background image

1-18

Seat, seatbelt and SRS airbags

Rear center seatbelt is stowed in the re-

cess of the ceiling.

1. Remove the connector (tongue) plate

from the slot located at the front of the re-

cess by pulling the connector (tongue)

plate rearward.

Fastening the seatbelt with the web-

bing twisted can increase the risk or

severity of injury in an accident.

When fastening the belt after it is

pulled out from the retractor, espe-

cially when inserting the connec-

tor’s tongue plate into the mating

buckle (on right-hand side), always

check that the webbing is not twist-

ed.

100108

Be sure to fasten both tongue plates

to the respective buckles. If the

seatbelt is used only as a shoulder

belt (with the connector’s tongue

plate not fastened to the connec-

tor’s buckle on the right-hand side),

it cannot properly restrain the wear-

er in position in an accident, possi-

bly resulting in serious injury or

death.

100109

100734

Advertising