Replacement of wiper blades – Subaru 2006 Legacy User Manual

Page 374

Advertising
background image

Maintenance and service

11-41

CONTINUED

Replacement of wiper blades

Grease, wax, insects, or other materials

on the windshield or the wiper blade re-

sults in jerky wiper operation and streak-

ing on the glass. If you cannot remove the

streaks after operating the windshield

washer or if the wiper operation is jerky,

clean the outer surface of the windshield

(or rear window) and the wiper blades us-

ing a sponge or soft cloth with a neutral

detergent or mild-abrasive cleaner. After

cleaning, rinse the windshield and wiper

blades with clean water. The windshield is

clean if beads do not form when you rinse

the windshield with water.

If you cannot eliminate the streaking even

after following this method, replace the

wiper blades using the following proce-

dures:

„

Windshield wiper blade as-

sembly

1. Raise the windshield wiper arm on the

driver’s side.

2. Next, raise the windshield wiper arm on

the passenger’s side.

1) Stopper

3. Remove the wiper blade assembly by

holding its pivot area and pushing it in the

direction shown by the arrow while de-

pressing the wiper blade stopper.

4. Install the wiper blade assembly to the

wiper arm. Make sure that it locks in place.

5. Lower the windshield wiper arm on the

passenger’s side slowly while supporting

it by hand.

6. Next, lower the windshield wiper arm

on the driver’s side slowly while support-

ing it by hand.

y

Do not clean the wiper blades with

gasoline or a solvent, such as

paint thinner or benzene. This will

cause deterioration of the wiper

blades.

y

When you wish to raise the pas-

senger-side wiper arm, first raise

the driver-side wiper arm. Other-

wise, the passenger-side wiper

assembly and driver-side wiper

assembly will touch each other,

possibly resulting in scratches.

y

Return the passenger-side wiper

arm to its original position before

returning the driver-side wiper

arm to its original position. Other-

wise, the passenger-side wiper

assembly and driver-side wiper

assembly will touch each other,

possibly resulting in scratches.

1

B00380

Advertising