Engine oil – Subaru 2006 Legacy User Manual

Page 342

Advertising
background image

Maintenance and service

11-9

CONTINUED

Engine oil

„

Checking the oil level

Check the engine oil level at each fuel

stop.

1. Park the vehicle on a level surface and

stop the engine.

2. Pull out the dipstick, wipe it clean, and

insert it again.

3. Be sure the dipstick is correctly insert-

ed until it stops with the graphic symbol

” on its top appearing as shown in

the illustration.

2.5-liter models
1) Notch
2) Upper level
3) Lower level

3.0-liter models
1) Upper level
2) Lower level

4. Pull out the dipstick again and check

the oil level on it. If it is below the lower

level, add oil to bring the level up to the up-

per level.

B00104

1

2

3

B00418

y

Use only engine oil with the rec-

ommended grade and viscosity.

y

Be careful not to spill engine oil

when adding it. If oil touches the

exhaust pipe, it may cause a bad

smell, smoke, and/or a fire. If en-

gine oil gets on the exhaust pipe,

be sure to wipe it off.

1

2

B00417

Advertising