Subaru 2006 Legacy User Manual

Page 170

Advertising
background image

Climate control

4-11

automatically. (There is one exception:

When the temperature control dial is

turned fully counterclockwise, the recircu-

lation mode is automatically selected.)

When the outside air mode is selected, a

” indicator light appears on the

display.

NOTE

When driving on a dusty road or be-

hind a vehicle that emits unpleasant

exhaust gases, set the air inlet selec-

tion button to the “

” position.

From time to time, return the air inlet

selection button to the “

” posi-

tion to draw outside air into the pas-

senger compartment.

„

Temperature sensors

1) Solar sensor
2) Interior air temperature sensor

The automatic climate control system em-

ploys several sensors. These sensors are

delicate. If they are treated incorrectly and

become damaged, the system may not be

able to control the interior temperature

correctly. To avoid damaging the sensors,

observe the following precautions:

– Do not subject the sensors to impact.

– Keep water away from the sensors.

– Do not cover the sensors.

The sensors are located as follows:

– Solar sensor: beside windshield de-

froster grille

– Interior air temperature sensor: on the

side of the driver-side part of the center

panel

– Outside temperature sensor: behind

front grille.

Continued operation in the “

position may fog up the windows.

Switch to the “

” position as

soon as the outside dusty condition

clears.

1

2

400589

Advertising