Rear combination lights – Subaru 2006 Legacy User Manual

Page 384

Advertising
background image

Maintenance and service

11-51

CONTINUED

„

Rear combination lights

T Sedan

1. Push the knobs of the cover to open

the cover.

1) Rear turn signal light
2) Backup light
3) Brake/tail and rear side marker light

2. Remove the bulb holder from the rear

combination light assembly by turning it

counterclockwise.

3. Pull the bulb out of the bulb holder and

replace it with a new one.

4. Set the bulb holder into the rear combi-

nation light assembly and turn it clockwise

until it locks.

5. Securely lock the cover against the

trunk trim by using the screwdriver to turn

the top knob clockwise.

T Station wagon

1. Using a Phillips screwdriver, remove

the upper and lower screws.

2. Wrap tape around a flat-head screw-

driver, then insert the screwdriver into the

B00436

1

2

3

B00437

B00134

3

2

1

B00438

Advertising