Knox Video VS-200 - Manual (Page 21)

K NOX V IDEO VS-200 O PERATION M ANUAL
16
5 FRONT PANEL CONTROLS
The range of buttons on the front of the unit provides the user with quick easy
access for selecting a variety of inputs and features.
The multi-directional switch on the front panel provides the user with a way of
navigating the on-screen-display (OSD) menu system. The RS232 interface and
infra-red remote control also provide further ways of controlling the unit, which are
detailed in a later section.
5.1 Button controls
Button Common Button Function
Multi-
directional
switch
Press once to show the on-screen display (OSD). Hold in to
cancel the OSD. Press and hold in to store current settings into
memory. They will then be restored on power-on, or when
RESTORE is pressed. See next section for more information.
RGB (n) Selects an RGB input as the current source for conversion.
CV (n) Selects a CV input as the current source for conversion.
YC (n) Selects a YC input as the current source for conversion.
FREEZE Freezes the current image (does not affect any background
image)
ZOOM Jumps to the ‘Zoom’ menu item (also steps Zoom between
100%, 150%, 200% and 300% if OSD is not active)
PAN Jumps to the Zoom pan menu item and allows immediate
panning of a zoomed image using multi-directional switch.
SIZE Jumps to the ‘Shrink’ menu item and allows immediate
adjustment of PIP size.
POS Jumps to the Shrink pos % menu item and allows immediate
adjustment of PIP position.
AUTOSET Activates Autoset for the current analog RGB input
PIP Activate picture-in-picture mode.
(Activates and deactivates the Shrink value in the ‘Adjust
windows’ menu in the OSD)
RESTORE Hold in briefly to restore to last-saved (power-on) defaults – this
is useful to ‘escape’ from non-displayable configurations. Hold in
for longer (two beeps) to perform a Factory reset of user settings.
STANDBY Hold in to put the unit into Standby (power-save) mode.
Hold in briefly to come out of Standby mode.