Knox Video VS-200 - Manual (Page 48)

K NOX V IDEO VS-200 O PERATION M ANUAL
43
The TAC number is a unique identifier for the unit and is for use with the PPF value
below.
The PPF number is for units that support the ‘Pay Per Feature’ system. Extra
features in the unit (such as Mix and Key) may be activated using this menu tiem by
entering in the correct numbers and re-starting the unit.
This screen provides a quick and easy way to store all current operating parameters.
The unit will remember the set up you are currently using at the time of data storage
and also when you next apply power. To store the current settings, press and
release the control button.
When turned on, the previously explained Adjust resolutions menu structure is
exposed. The default condition is ‘Off’, to prevent accidental changes.
In order for Autoset to work properly, it needs a sufficiently bright full-screen image to
examine. The sense level lets you change the brightness threshold for detection of
the screen edge between Low, Medium, High and V.high. Medium is the default
level, which is recommended for normal use (Windows-type images, etc.)
This parameter controls whether the ‘welcome’ screen is displayed or not on power
up for units with an on-screen display – it can be disabled as required. This is useful
when a unit is installed as part of an overall system.
This parameter is available on certain units and controls how bright the LEDs on the
front panel appear.
System
Push to store
System
TAC# 27-AA-1C-93-F8-33
System
Autoset sense [Medium]
System
OSD on power up [On]
System
LED brightness % [ 90]
System
PPF# 1A-67-2B-9D-50-4F
System
Advanced Menus [Off]