AMETEK M130 - Manual (Page 33)

Sorensen Ethernet Option Configuration
M130/M131 Programming Manual 2-15
Figure 2-16. DCS Home Page
• The Model number, the Manufacturer, and the Serial Number of your
Ethernet power supply
• Firmware Revision: the version of the Ethernet firmware that is currently
installed for the Master. (See SLAVE INFO page for slave firmware
version.
• VISA Resource identifies the specific resource name used to
communicate via VISA (Virtual Instrument Software Architecture)
• LXI™ Compliance: the version and instrument class of the LXI™
standard with which your power supply is compliant
• Host Name: either the default or user-defined, network-unique identity
• Description: either the default or user-defined description of the power
supply in use (you can change the description to suit your needs, in the
CONFIGURATION page)
• MAC Address: the power supply Ethernet’s unique hardware address
• IP Address: your power supply’s address actually in use at start-up; can
be statically configured, DHCP acquired (default), or Auto-IP assigned
(see description for
CONFIGURATION page)
• Subnet Mask: network segment your power supply is on
• Gateway: IP address through which the instrument communicates with
systems that are not on the local subnet
• DNS Server: IP address of the Domain Name System (DNS) server
• Listening Port: port number for the embedded Web server