AMETEK M130 - Manual (Page 72)

IEEE 488.2 and SCPI Command Operation Sorensen Ethernet Option
3-22 M130/131 Programming Manual
3.9 STATUS SCPI C
OMMAND
S
UBSYSTEM
3.9.1 STATUS SCPI C
OMMAND
S
UMMARY
STATus[n]
:OPERation
:CONDition?
:ENABle <0+NR1>
:EVENt?
:PRESet
:PROTection
:CONDition?
:ENABle <0+NR1>
:EVENt?
:SELEct <0+NR1>
:QUEStionable
:CONDition?
:ENABle <0+NR1>
:EVENt?
3.9.2 STATUS SCPI C
OMMAND
R
EFERENCE
Command Description SCPI
STATus[n] Status subsystem. n = 1-31. The default
channel is 1. C
:OPERation C
:CONDition? Returns the integer value of the Operation
Condition Register. The query is supported
but will always return “0” indicating
operational condition. C
:ENABle <0+NR1> Sets the enable mask of the Operation
Event Register allowing true conditions to be
reported in the summary bit of the Operation
Condition Register. Values are written and
queried but have no effect on the Operation
Condition Register. C
:EVENt? Returns the integer value of the Operation
Event Register. This query is supported but
always returns a value of “0” indicating
operational condition. C
:PRESet Sets the enable mask of the Operation
Event Register and the Questionable Event
Register to all 1’s. C