Aviosys 9211 - Manual (Page 16)

NOTICE:
1. Make sure the power and Ethernet connection of the 9222 are connect properly.
2. It can automatically obtain the virtual IP address after you run the ipeditv3.exe but only if your
Ethernet supports DHCP. Click the IP address to enter the web page.
If your Ethernet does not support DHCP, IP92XX you will change its IP address to fixed IP address.
Please follow the steps below to change the subnet of your PC:
3. If can not get in the 92XX web page, please set the segment of IP 9222Delux to be same as your
PC.
* You can get your PC network information – IP Addres, Subnet Mask and Default Gateway by step:
start execute key “cmd” in dialog key “ipconfig” in MS-DOS mode
16