Aviosys 9211 - Manual (Page 31)

For example:
* Mail Server: 123.com * Pop3Servcer: abc.com
* Password: XXXXXXXX * Sender: [email protected]
* Receiver 1:
[email protected] * Subject: 9222
1.) Mail Server: The server that sends e-mails out.
Please make sure that the server is an available mail server.
2.) Pop3 Server: The server receive IP address (in Internet WAN) from your ISP
for sending Internet IP address by E-mail when 9222 in Internet.
To receive IP address in WAN , please fill your ISP e-mail receive server.
In this part, please also set the DNS of your ISP in system configuration.
3.) Password: The password of this mailbox is no longer than 8 English characters.
4.) Sender: Please fill in the name of sender. The Mail Server must support SMTP and
these fields must be entered correctly.
5.) Receiver: No longer than 50 English letters. Please use blank space to separate each
receiver’s e-mail address. After you have finished setting up this portion you will receive
an email to inform you of the IP address of the IP Power 9222 every time you enter the
webpage.
6) Subject : The subject of the mail to be no more than 50 English letters.
7) Mail Body: Please type the content of the mail here, it cannot be left empty.
After you have finished all of the above settings, click “ SAVE “ button to save your settings.
6.7 Time Scheduler
User can control the time ON or OFF of the 9222Delux DO through a preset time scheduler.
31