Aviosys 9211 - Manual (Page 38)

1.) Execute I/O Tracker.exe: In Search Tool Area, device(s) located in LAN will display
automatically. Select the 9211 device
2.) Type in the device username & password in the section on the right.
3.) Press “Master” and your settings will be displayed at the left bottom corner for Master Control
Area.
*These Master Control settings will correspond to the setting in the devices webpage.
4.) After the connection has been made, to test the device the user can control Input status button
in Master Control Area. This basically mirrors the manual test buttons located on the 9211. The
Input status button in Slave control area can not be pressed or controlled.
8.2.3 Setting up Slave in IOTracker
* Only 9222 and Output box of 9222
1.) Execute I/O Tracker.exe: In Search Tool Area, the any device(s) in LAN will display
automatically. Select the 9222 device
2.) Type device password in the section on the right.
38