Aviosys 9211 - Manual (Page 44)

Step 6. There will be a new file “ Update_2006-01-11.bin” which is the BIN file include the amend web
page. Please follow 9222-update procedure to update the firmware BIN file. Please note the Update
procedure must be done in port 80.
Note: program “Make9222Html.exe “ and amend web page must in same file.
* If update fail and can not get IP address by IP EDIT, please use RS232 jack (DB 9 Cable)
connect with the PC and 9222, and you can get IP address to log-in and update again. Please refer
follow step:
1.POWER OFF the 9222
1. Use DB9 cable connect to the COM1 of PC and the RS232 of 9222
2. Execute WIN program " Hyper Terminal”: please go to " Start" --> " program" " Accessories " -->
" Communications " “Hyper Terminal”.
44