Aviosys 9211 - Manual (Page 28)

Note: When you enable this function - DI controls DO, “ SET I/O “ will be disable.
7. Control function by MAC address:
The device (Output of 9222, 9222, or 9060 Series) is
controlled by the Input of the 9222 or 9211.
This feature allows the user to search for the device within LAN or WAN with just a MAC address
without the need to port forward or port trigger the device.
If press the button ”Setting IN 1-8“ then you will get following page so you can setup DI and DO
settings.
28