Installation – Flowserve URB 1 User Manual
Page 10
10
Technical data
Type approval no.
TÜV · 98-399 (level)
TÜV · WÜL · 02-007 (conductivity)
Input
Power supply: 18 V – 36 V DC
Interface for CAN bus using CANopen protocol to DIN ISO 11898
Output
Interface for CAN bus using CANopen protocol to DIN ISO 11898
Indicators and adjustors
1 illuminated display, resolution: 128 x 64 pixels
5 push buttons
1 three-pole code switch for baud rate setting
Supply voltage
18 V – 36 V DC
Protection
Front panel:
IP 54 to DIN EN 60529
Back:
IP 00 to DIN EN 60529
Admissible ambient temperature
0 °C – 55 °C
Case material
Front face: Aluminium with polyester membrane
Casing: Noryl GFN 2 SE 1, glass-fibre reinforced
Weight
Approx. 0.3 kg
Installation
URB 1
Tool
Panel mounting
1. Provide panel cut-out, dimensions: 92
+0.8
x 92
+0.8
.
2. Install URB 1 using the fixing clips supplied with the equipment.
■
Screwdriver (5.5/100)
Explanatory Notes
– continued –