Basic settings – Flowserve URB 1 User Manual
Page 45
Advertising
45
Basic Settings
– continued –
Adjusting conductivity controller
Press button twice briefly to activate
the line editing mode.
Use button or to scroll back and
forth through the lines.
The split-screen main window shows
which GESTRA bus devices can be
indicated:
■
High-level limiter NRS 1-41
■
Low-level limiter NRS 1-40
■
Level switch NRS 2-40
■
Level controller NRR 2-40
■
Conductivity controller LRR 1-40
Press button twice briefly to enter the
parameterisation mode for the following
settings:
■
µS/cm or ppm
■
Indicating range of actual value graphics
■
Max. conductivity
■
Setpoint
■
Min. conductivity
flashing
twice briefly
twice briefly
Advertising