Basic settings – Flowserve URB 1 User Manual
Page 22
Advertising
22
Basic Settings
– continued –
Setting / changing node IDs of bus-based equipment
– continued –
Press button twice briefly to save the
settings and return to the main window.
Press button briefly to activate the
parameterisation mode.
In this example the node IDs of all bus
devices have already been adjusted.
If the display of the NRS 1-42 is required
set the node IDs of the NRS 2-40 and
NRR 2-40 to “O
FF
”.
briefly
twice briefly
Advertising