Flowserve URB 1 - Manual (Page 12)

12
Tools
■ Screwdriver for slotted screws, size 2.5, completely insulated according to
VDE 0680
Wiring
– continued –
Note
■ Connect screen only to terminal 3, ensuring electrical continuity and
connect equipment once to the central earthing point (CEP).
■ The loop resistance must be under 10
Ω
.
■ The rated voltage is stated on the name plate.
■ Despite correct wiring H.F. interference caused by the installation may
lead to system breakdowns and malfunction messages. If necessary
refer to the fault finding lists of the respective bus equipment.