Flowserve URB 1 - Manual (Page 51)

51
Press button once briefly to enter the
line where the operating position of the
continuous blowdown valve can be
changed.
Press button once briefly to enter the window
where the operating position and the feedback
potentiometer of the continuous blowdown valve
can be adjusted.
If X
p
> 0 the operating position setting
is deactivated.
The window shows also the reference values
(in %) as indicated by the scale of the GESTRA
continuous blowdown valve BAE (000 = 0 %, 035
= 35 %) and the current position of the continuous
blowdown valve (in %).
Press button once briefly to enter the
line where the 24 h purging pulse for the
continuous blowdown valve can be
adjusted.
Use buttons and to enable or,
respectively, disable the 24 h purging
pulse.
Press button twice briefly to activate the line
editing mode.
Use button or to change the values of the
digits. Press to go to the next digit.
The value 008 corresponds to an opening
position of 8 %. (Max. opening position 25 %)
Basic Settings
– continued –
Adjusting conductivity controller
– continued –
flashing
once briefly
once briefly
once briefly
twice briefly