Basic settings – Flowserve URB 1 User Manual
Page 68
Advertising
68
Basic Settings
– continued –
Disabling temperature compensation
Press button twice briefly to activate
the line editing mode.
The split-screen main window shows
which GESTRA bus devices can be
indicated:
■
High-level limiter NRS 1-41
■
Low-level limiter NRS 1-40
■
Level switch NRS 2-40
■
Level controller NRR 2-40
■
Conductivity controller LRR 1-40
Press button four times briefly.
Some industrial applications may require
disabling the temperature compensation. Note
that with this mode all conductivity values
displayed by the URB 1 are absolute
readings of the current conductivity.
In our example we start from the factory set
“TK:LIN” mode.
flashing
4 times briefly
twice briefly
Advertising