GAI-Tronics 352-7xx Division 1 VoIP Page Phones - Wired and WiFi - Manual

Pub. 42004-486B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 352-7xx and 352-8xx Division 1
VoIP Page Phones - Wired & WiFi
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
GAI-Tronics’ Class I, Division 1 VoIP Page Phones are constructed of cast aluminum and are
weatherproof and corrosion resistant. The built-in high-efficiency Class D paging amplifier provides up
to 30 watts of speaker output, allowing Multicast broadcast page announcements over speakers.
The GAI-Tronics VoIP Page Phones consist of both wired and wireless versions with three model types:
handset, headset, and amplifier-only. Each of these model groups
has input power options. Refer to the Model Chart in Table 1.
The Div. 1 VoIP Page Phones are designed for connection to a
10/100 BaseT Ethernet. An external ac or dc power source is
required for full power operation. Power-over-Ethernet (PoE)
models do not require additional power, but have limited speaker
output.
The WiFi models are designed for connection to a wireless local
area network (WLAN) that meets the IEEE 802.11 b/g/n standard.
An external ac or dc power source is required for operation.
In addition to providing SIP telephone operation and speaker
amplifier paging, the Div. 1 VoIP Page Phones provide real-time
alarm reporting. This enables system supervisors to monitor the
telephones’ activity and to address caller needs or maintenance
issues immediately. There are also configurable inputs and
outputs available in all models.
Figure 1. Mode 352-8xx Div. 1
VoIP WiFi Page Phone