GAI-Tronics 352-7xx Division 1 VoIP Page Phones - Wired and WiFi - Manual (Page 17)

Pub. 42004-486B
Model 352-7xx and 352-8xx Division 1 VoIP Page Phones – Wired & WiFi Page 17 of 29
f:\standard ioms - current release\42004 instr. manuals\42004-486b.doc
12/14
After the configuration has updated the Web page will show Set Successfully, Restart to use new setting.
Then click on the STA Interface Setting selection. The STA Interface Setting Web Page will open.
Figure 13. WiFi Interface STA Interface Setting Web page
Click the Search button in the AP’S SSID section to find the WiFi network that the VoIP Telephone will
operate in. The Site Survey Web page will open showing all available networks. Select the desired
network and click the Apply button.
Figure 14. WiFi Interface Site Survey Web page
A reminder window for entering the WEP Key will pop up. Click the OK button.
When the STA Interface Setting Web page opens again, the AP’s SSID, Security Mode and Encryption
Type fields will automatically be filled in. Now enter the WEP Key or Pass Phrase for the selected
network and click the Apply button.
If the VoIP telephone is not within the range of the wireless network that it is being configured to operate
in, the AP’s SSID, Security Mode, Encryption Type and WEP Key or Pass Phrase fields will need to be
manually filled in before you click the Apply button.