Mounting, Cable entries – GAI-Tronics 352-7xx Division 1 VoIP Page Phones - Wired and WiFi User Manual
Page 5
Pub. 42004-486B
Model 352-7xx and 352-8xx Division 1 VoIP Page Phones – Wired & WiFi
Page 5 of 29
f:\standard ioms - current release\42004 instr. manuals\42004-486b.doc
12/14
Mounting
N
OTE
: The mounting surface must be able to support the weight of the telephone, which is 31 lbs.
The enclosure must be securely fastened with 3/8-inch diameter steel mounting bolts located on all four
mounting feet. Stainless steel hardware is recommended in outdoor applications. Refer to Figure 2. The
suggested mounting height is 48 inches to the bottom of the enclosure.
N
OTE
: Refer to the Killark Installation, Operation, and Maintenance Data Sheet for the Killark Part. No.
EXB-684 N34 Base Enclosure (enclosed with the unit) for additional information.
Figure 2. Model 352 Series Division 1 VoIP Page Phone Enclosure Mounting Details
Cable Entries
Refer to Figure 3 for the NPT conduit entries. Ensure any unused openings are sealed with proper fittings
per local standards. Use field wiring suitable for the ambient temperature. Any conduit NPT plugs
(blanking elements) must be explosion-proof with a Type 4X rating.
Figure 3. Model 352-7xx and 352-8xx Series VoIP/WiFi Conduit Entries