Gasboy 03908X - Manual (Page 18)

Installation
Page 18 MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006
Figure 15: Wires from IS Barrier Extending Through Shelf
8 At the C06392 9800 CPU Printed Circuit Board Assembly ( Figure 16 and Figure 17 ),
disconnect the connector connected to the Pulser 1, Handles, and Pulser 2 jacks.
9 In the kit, locate the 461A2 Circuit Board Assembly (see Figure 1 for identity). Connect the
assembly to the jacks labeled Pulser 1, Handles, and Pulser 2 on the 9800 CPU PCB.
10 Reconnect the connector removed in Step 8 to the 461A2 Circuit Board Assembly (directly
above the Pulser 1, Handles and Pulser 2 connectors).
11 At the 9800 CPU PCB Assembly ( Figure 16 and Figure 17 ), disconnect the connector
connected to the LCD Display jack.
Wires from IS Barrier
Grommet