Gasboy 03908X - Manual (Page 23)

MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006 Page 23
Installation
33 Using SAF-T-LOK TPS sealant, coat the BC407 Thermowell threads and thread into one of
the holes where the plugs were removed in the previous step (
Figure 22 ).
Figure 22: Thermowell and Probe Assembly Connections
34 Using a proper size wrench, tighten the thermowell and place the 235-C Thermowell plug into
the thermowell.
35 Coat the threads of the BC546 Adapter with SAF-T-LOK TPS sealant and turn it into the other
hole where the plugs were removed in
step 32 (see Figure 22 ).
36 Coat the threads of the W199 Probe Assembly with SAF-T-LOK TPS sealant and turn it into
the BC546 adapter mounted in the previous step.
37 Using the proper size wrench, tighten both the adapter and probe.
When applying SAF-T-LOK TPS sealant on threads, leave the two threads that enter the hole
first free of sealant to prevent the sealant from entering, and possibly damaging or inhibiting
proper operation of, the unit.
CAUTION
Probe Assembly
Thermowell Plug
Adapter
Thermowell
Be sure the threads on the thermowell, adapter, and probe assembly are properly
coated with the SAF-T-LOK TPS sealant and tightened properly to prevent leaks
.
CAUTION