Figure 18, Figure 19 – Gasboy 03908X User Manual
Page 20
Installation
Page 20
MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006
16
Connect one end of the second W284 cable to P8 on the 461A2 board (
) and the
other end to P3 in the LP-70 Polycase box (
Note: Be sure the cables are connected to the connectors as follows:
P1 of 461A2 to P2 of LP-70 Polycase box
P8 of 461A2 to P3 of LP-70 Polycase box
Figure 18: 461A2 Circuit Board in Place with Connections Made
Figure 19: LP-70 Polycase Box Showing Connections
17
In the kit, locate the W283 Display Adapter harness (see
for identification).
18
Connect one connector on the harness (both are the same) to J4 on the 460A4 Circuit Board
Assembly (
) and the other connector to P6/P7 in the LP-70 Polycase box (
461A2 PCB
P1
P8
P3
P2
P5
P6/P7
DIP
Switches