Gasboy CFN Series Site Controller III Start-up - Manual (Page 87)

MDE-4793A CFN Series Site Controller III Start-up Manual for CFN III Versions 3.5 and above · November 2008 Page 81
Sign-on and Preliminary Steps Start-up Commands
4 At the SIGN-ON prompt, enter the User ID 98, a comma, and the new password with no
spaces (
Figure 13-3 ).
Figure 13-3: Example of Initial Sign on as First Administrator
Sign on: 98,456E98CDA123B987 <RETURN>
P*
Note: User 98 is automatically set up by the system. Type “98” followed by the master
password to gain all access to the Gasboy Secure Controller. The master password is
case-sensitive and the letters provided will always be in upper case.
Setting Administrator User IDs and Passwords
To set Administrator User IDs and Passwords, proceed as follows:
1 Type ADMPASS at the P* as User 98 will access the ADMPASS menu window and allow
you to add additional administrators and all the other users with their security level for the
entire system.
While you are signed on as User 98 for the first time, immediately add another user
with a high administrative level (9 or 10).
IMPORTANT INFORMATION
Figure 13-4: Password Administration Menu
P* ADM* <RETURN>
Gasboy International Site Controller III
Version 1.0.0.5
Password Administration Menu
1. Add new User to System:
2. Enable or Disable User:
3. Modify user Information:
4. Remove User from System:
Enter item Number, Q-Quit
At any time press ? For help: