IDK GF-100 - Manual (Page 43)

GF-100 User’s Guide
43
7.3.7 Selecting test tone
Sink test connector
GF-100 Sink device
Beep
[Fig. 7.11] Test tone
Menu
TOP → TEST PATTERN → TEST TONE
Set value
MUTE, 400Hz(CH3=30Hz), 400Hz(CH3=80Hz)
1000Hz(CH3=30Hz), 1000Hz(CH3=80Hz) [Default]
7.3.8 Test tone: output channel
CH4
CH1 CH2
CH3
CH5 CH6
CH7 CH8
[Fig. 7.12] Speaker configuration example
Menu
TOP → TEST PATTERN → TONE CH
Set value
CH1-CH8, CH1-CH2 [Default]
CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8