4 input bus reset time, 2 sink test connector, 1 outputting signals forcibly – IDK GF-100 User Manual
Page 56: 3 system clock, 1 setting current time of the gf-100, Input bus reset time, Sink test connector, Outputting signals forcibly, System clock, Setting current time of the gf-100
Advertising
GF-100 User’s Guide
56
10.1.4 Input bus reset time
If the GF-100 detects an error in input signals, it disconnects the internal input bus for the set time in order to
resolve the problem.
Menu
TOP → SETTINGS → VIDEO INPUT → BUS RESET TIME
Set value
OFF
1ms to 800ms: Input bus reset time [Default: 200 ms]
10.2 Sink test connector
10.2.1 Outputting signals forcibly
Menu
TOP → SETTINGS → VIDEO OUTPUT → FORCED OUT
Set value
OFF [Default]
ON: Signals are output forcibly even if the GF-100 cannot detect the sink device.
10.3 System Clock
10.3.1 Setting current time of the GF-100
Menu
TOP → SETTINGS → CLOCK
Press the “SET” key to set the setting.
Advertising