Menu – Kemppi Pulse TCS User Manual
Page 16
EN
3.2
CONTROL FROM THE K 60 PANEL
KempArc Pulse TCS features K 60 control panel with a clear and logical LCD menu display. The
menu allows the operator to refine, adapt and manage the arc process and system function
before, during and after welding.
3.3
LAYOUT OF CONTROL PANEL K 60
CHANNEL
MENU
F1
F2
F3
CHANNEL
INFO
WF #
1.
4.
5.
6.
2.
7.
3.
8.
1. Power on button
• Long press (5 sec) switches the panel on or off.
• Short press returns channel information.
NOTE!
This button connects power to the control panel. Use the main switch on the front of the
power source to switch the power source on or off.
2. Welding channel selection buttons
KempArc Pulse TCS offers 100 memory channels for you to store your frequently used welding
jobs.
• To browse memory channels, press + and – buttons.
• To define a new welding job to an empty channel, press the button under the display
text NEW.
3. MENU button
This button takes you to the main menu list. Proceed following the instructions on screen.
4. Adjustment knob
Turn the knob to change the value of the selected parameter.
5. Menu browsing buttons
Use up and down arrows to move the selection up and down in the menu structure.
6. Menu shortcut buttons
• F1 displays the channel information.
• F3 selects another parallel connected wire feeder sub system as a setup target.
14
KempA
rc P
ulse
TCS / © Kemppi O
y / 1204