Kemppi Pulse TCS - Manual (Page 18)

EN
3.4.2 Welding parameters (Channel menu 2/6)
MIG
WFSpeed 0.7 – 25 m/min 0.05 m/min steps when WFSpeed < 5 m/min and
0.1 m/min steps when WFSpeed > 5 m/min
WFS-Max Set the limit for maximum WFSpeed
WFS-Min Set the limit for minimum WFSpeed
Voltage 8 – 50V 0.1V steps Controls the length of the arc
Dynamics -9 ... +9 Factory setting is 0 Controls the short circuit behaviour of the arc. The lower
the value the softer the arc is. The higher the value the
rougher the arc is.
1-MIG
WFSpeed 0.7 – 25 m/min 0.05 m/min steps when WFSpeed < 5 m/min and
0.1 m/min steps when WFSpeed > 5 m/min
WFS-Max Set the limit for maximum WFSpeed
WFS-Min Set the limit for minimum WFSpeed
FineTuning Factory setting is 0
( = curve point) Adjusts the arc voltage of the curve within certain
limits. In other words, it adjusts the length of the arc
within certain limits
FineTuningMax 0 – 9 0.5 steps Set the limit for maximum arc length
FineTuningMin -9 ... 0 0.5 steps Set the limit for minimum arc length
Dynamics -9 ... +9 Factory setting is 0 Controls the short circuit behaviour of the arc. The lower
the value the softer the arc is. The higher the value the
rougher the arc is.
PULSE MIG
WFSpeed 0.7 – 25 m/min 0.05 m/min steps when WFSpeed < 5 m/min and
0.1 m/min steps when WFSpeed > 5 m/min
WFS-Max Set the limit for maximum WFSpeed
WFS-Min Set the limit for minimum WFSpeed
FineTuning Factory setting is 0
( = curve point) Adjusts the base current of the curve in certain limits.
In other words, it adjusts the length of the arc in certain
limits.
FineTuningMax 0 – 9 0.5 steps Set the limit for maximum arc length
FineTuningMin -9 ... 0 0.5 steps Set the limit for minimum arc length
Dynamics -9 ... +9 Factory setting is 0 Controls the short circuit behaviour of the arc. The lower
the value the softer the arc is. The higher the value the
rougher the arc is.
Pulse Current -10 ... +15 % Factory Setting
is 0% Reduces the pulse current of the curve at the maximum
10% and raises it at the maximum 15%.
16
KempA
rc P
ulse
TCS / © Kemppi O
y / 1204