LSC Lighting e24V3 - Manual (Page 33)

e24V3 Dimming System ePLATE REMOTE CONTROLLERS
Operator Manual V3.0
LSC Lighting Systems (Aust) Pty. Ltd Page 29
Using this method, each pair of buttons on an
ePlate are easily used as On (fade up) and OFF
(fade down) buttons.
• You record the odd numbered memories
with the levels you require.
• You record the even numbered
memories with the same channels but at
0% level.
7.9 Programming ePlates
You can program the functions of the buttons
and faders on ePlates to suit your specific
requirements using a computer program
available from your LSC agent or you can
contact LSC and they will custom program
ePlates for your specific requirements.
The programable functions of buttons, indicators
and faders are listed below.
7.10 ePlate Functions
A button can be configured to:
• Activate a memory with a specific fade time
and level.
• Control multiple memories from a single
button.
• Switch dimmer channels between DMX and
Memory (ePlate) control (if the channel’s
“control source” has been set to “switch”).
• Lock / unlock the operation of other ePlates.
The indicators beside each button are
independently programmed and can indicate:
• Memory # activated. Brightness of indicator
shows level of memory.
• ePlate active or locked.
• DMX or Memory control selected.
A fader can be configured to:
• Control the level of a memory (or channel).
• Act as a Grand Master over all channels.
• Act as Group Sub Master over the memory
levels of channels in that group number.
• Set the Fade Time for a memory.
Button 1 recalls Memory 1
with channels 1, 3 and 6 at
various levels.
Button 2 recalls Memory 2
with channels 1, 3 and 6 at
0% level.