LSC Lighting e24V3 - Manual (Page 40)

e24 Dimming System
Operator Manual V2.2
Page 36 LSC Lighting Systems (Aust) Pty. Ltd
.
13 SOFTWARE UPGRADE
LSC Lighting Systems has a corporate policy of continuous improvement to its products. The e24V3
software (firmware) is subject to this policy as new features are added and existing features improved.
The software version of your e24V3 is momentarily displayed on the LCD touch screen when the e24V3
is switched on or at any time by pressing [Menu] [Options] [About]. The latest version of e24V3 software
can be downloaded from the LSC web site,
www.lsclighting.com
To upgrade your e24V3 software, the new software is loaded into the e24V3 via CODELINK. CODELINK
is a communication program that runs on a PC based computer. The CODELINK cable connects the
personal computer (PC) comm port to the e24V3 Codelink connector which is located on the front control
panel.
The CODELINK program together with full instructions can be downloaded from the LSC website,
www.lsclighting.com or you can contact LSC or your LSC dealer.
14 COMPLIANCE STATEMENTS
14.1 C TICK COMPLIANCE STATEMENT
All LSC products with CE Compliance automatically comply with C-Tick requirements as per Section 182
of the Radiocommunications Act 1992. LSC Company Registration number is N921.
14.2 CE COMPLIANCE STATEMENT
The e24V3 Dimming System from LSC Lighting Systems (Aust) Pty. Ltd. has been designed and tested
to the European Committee for Electrotechnical Standardization (CENELEC) standard– EN55022
(Information Technology Equipment).
14.3 PRODUCT OF AUSTRALIA
The e24V3 Dimming System meets the requirement status “Product of Australia” as defined by the
Australian Governments Trade Practises Act 1974, Section 65AC and administered by the Australian
Made Campaign Limited (AMCL). All LSC manufactured products have virtually all their design,
production and manufacture processes occur in Australia, thus qualifying for the highest status by the
AMCL.
14.4 DISCLAIMER
LSC Lighting Systems (Aust) Pty. Ltd. has a corporate policy of continuous improvement, covering areas
such as product design and documentation. In light of this policy, some detail contained in this manual
may not match the exact operation of your product.
In any event, LSC Lighting Systems (Aust) Pty. Ltd. can not be held liable for any direct, indirect, special,
incidental, or consequential damages or loss whatsoever (including, without limitation, damages for loss
of profits, business interruption, or other pecuniary loss) arising out the use or the inability to use this
product for its intended purpose as expressed by the manufacturer and in conjunction with this operating
manual.
Servicing of this product is recommended to be carried out by LSC Lighting Systems (Aust) Pty. Ltd. or its
authorised service agents. No liability will be accepted whatsoever for any loss or damage caused by
service, maintenance or repair by unauthorised personnel. In addition servicing by unauthorised
personnel may void your warranty.