LSC Lighting e24V3 - Manual (Page 35)

e24 Dimmer WIRELESS DMX512 OPTION
Operator Manual V3.0
LSC Lighting Systems (Aust) Pty. Ltd Page 31
9 WIRELESS DMX512 OPTION
Two models of wireless DMX receivers are
available as an option on the e24V3.
• W-DMX supplied by Wireless Solutions.
• SHoW DMX supplied by City Theatrical.
The wireless DMX modules supplied by LSC for
the e24V3 are modified receiver boards from the
above manufacturers. You will need a
compatible wireless DMX transmitter module
from the same manufacturer of the wireless
DMX option fitted to your e24V3.
LSC does not supply wireless DMX transmitters.
Contact either www.wirelessdmx.com for
W-DMX transmitters or www.citytheatrical.com
for SHoW DMX transmitters.
The wireless DMX module can work as the sole
DMX input source for the e24V3 or as a back-up
source for the cable DMX input.
If both cable and wireless DMX are available,
the e24V3 will automatically use the cable DMX.
The DMX SOURCE indicators show the current
DMX status.
Cable LED
• Green = Cable DMX Data in use.
Wireless LED
• Green = Wireless DMX Data in use.
• Orange = Wireless DMX Data available
but not in use.
9.1 Wireless Solutions W-DMX
Operation
To link the W-DMX receiver in the e24V3 to your
DMX transmitter, ensure that the DMX
transmitter is ON then press and release the
FUNCTION button. This process may take up to
10 seconds to synchronise. Once synchronised,
the STATUS indicator will illuminate.
To unlink the W-DMX receiver from the DMX
transmitter, press and HOLD the function button
until the STATUS indicator goes off.
9.2 City Theatrical’s SHoW DMX
Operation
The STATUS indicator shows the current
wireless status.
• Flashing RED = NO DMX transmitter
detected.
• Flashing GREEN = DMX transmitter
detected.
The display will timeout and turn off after 10
seconds if no buttons are pressed. If the display
has turned off, press either button to turn it on.
• Press the left button to move through
the four menus.
Menu Display Description
1 ID
XX SHoW ID (1-64)
2 P XX Power Setting
3 SW Software Version
4 CERT Radio Compliance
Press the right button to activate a menu.
While in a menu;
• Press the right button to move forward
through the menu options.
• Press the left button to move back
through the menu options.
• Press and HOLD the right button to
scroll forward through the menu options
• Press and HOLD the left button to select
a menu options.
SHoW DMX
option fitted
Wireless DMX
aerial