Marantz SR6008 User Manual
Page 132
132
2 Connection 2 : Connection through the speaker
output terminals
• Set the “Assign Mode” (vpage 173) setting to “ZONE2”, and
outputs ZONE2 audio from SURROUND BACK speaker terminals.
• If you set the “Assign Mode” (vpage 173) setting to “ZONE2”,
the main zone home theater system can play back up to 5.1-channels.
Even if you play back audio recorded in 6.1 or 7.1-channels, this unit
automatically downmixes the audio to 5.1-channels.
MAIN ZONE
SURROUND
SURROUND
SURROUND BACK
SURROUND BACK
FRONT HEIGHT/WIDE
SPEAKERS
IMPEDANCE : 6～8Ω
ASSIGNABLE
SURROUND
SURROUND
SURROUND BACK
SURROUND BACK
FRONT HEIGHT/WIDE
ZONE2
w
q w
q
(L)
(R)
This unit
2 Connection 3 : Connection using an external
amplifier
The audio signals of this unit’s ZONE2 audio output connectors are
output to the ZONE2 amplifiers and played on these amplifiers.
ZONE2
MAIN ZONE
AUX IN
R
L
This unit
Power
amplifiers
%
• We recommend using high quality pin-plug (RCA type) cables for audio connections
in order to prevent noise.
• If you select a same input source for MAIN ZONE and ZONE2, audio playback may
be restricted.